ipaddr

A library for manipulation of IP (and MAC) address representations
IN THIS PACKAGE
  • Remove stdlib-shims dependency, require OCaml 4.08+ (@hannesm, #112)

  • Switch to ounit2 (@Alessandro-Barbieri, #111)

v5.3.0 (2022-03-04)

  • Add with_port_of_string function (@dinosaure, @hannesm, #108)

  • breaking-change Be restrictive on Ipaddr.of_string (@dinosaure, @hannesm, #109)
    Before this release, Ipaddr.of_string accepts remaining bytes and returns
    a valid value such as "127.0.0.1aaaa" is valid. Now, ipaddr does not
    accept a string with remaining bytes.

v5.2.0 (2021-09-11)

  • Use Cstruct.length instead of deprecated Cstruct.len (#106, @hannesm)

  • Provide instantiated functors Set, Map, V4.Set, V4.Map, V6.Set, V6.Map
    (#106, @hannesm)

v5.1.0 (2021-06-08)

  • Reject octal notation in IPv4 (cve-2021-29921, #104, @jsachs)

  • CI fixes, upgrade to ocamlformat 0.18 (@hannesm)

v5.0.1 (2020-09-30)

  • Fix V4.Prefix.broadcast and last with /32 prefixes (#102 @verbosemode)

v5.0.0 (2020-06-16)

  • Do not zero out the non-prefix-length part of the address in
    {V4,V6}.Prefix.t (#99 @hannesm)
    Removed {V4,V6}.Prefix.of_address_string{,_exn} and
    {V4,V6}.Prefix.to_address_{string.buffer}

    To port code:

    • if you rely on Prefix.of_string to zero out the non-prefix-length address
      bits, call Prefix.prefix : t -> t subsequently.

    • Prefix.of_address_string{,_exn} can be replaced by
      Prefix.of_string{,_exn}, to retrieve the address use
      Prefix.address : t -> addr.

    • The Prefix.to_address_{string,buffer} can be replaced by
      Prefix.to_{string,buffer}, where Prefix.t already contains the IP
      address to be printed.

    • Instead of passing {V4,V6}.t * {V4,V6}.Prefix.t for an
      address and subnet configuration, {V4,V6}.Prefix.t is sufficient.

  • Implement {V4,V6,}.succ, {V4,V6,}.pred, {V4,V6}.Prefix.first, and
    {V4,V6}.Prefix.last functions (#94 @NightBlues)

  • Rename Prefix.of_netmask to Prefix.of_netmask_exn with labelled
    arguments (~netmask and ~address), provide Prefix.of_netmask which returns
    a (t, [> `Msg of string ]) result value (#95 @hannesm)

  • Fix undefined behaviour of V4.Prefix.mem with a CIDR with prefix length 0
    (#98 @verbosemode)

  • Use stdlib-shims to prevent deprecation warnings on OCaml 4.08
    (@avsm)

  • Remove unnecessary "sexplib0" dependency (#95 @hannesm)

  • Remove "{build}" directive from "dune" dependency (#93 @CraigFe)

v4.0.0 (2019-07-12)

  • Rename the to/from_bytes functions to refer to octets
    instead. This distinguishes the meaning of human-readable
    addresses (strings in this library) and byte-packed
    representations(octets in this library) from the OCaml
    bytes type that represents mutable strings.

    Porting code should just be a matter of renaming functions
    such as:

    • Ipaddr.of_bytes becomes Ipaddr.of_octets

    • Macaddr.to_bytes becomes Macaddr.to_octets

  • Introduce new write_octets functions that can write
    octet representations of IPv4/v6 into an existing bytestring.

  • Use the domain-name library to produce domain names
    from IP addresses.

  • Remove the ipaddr.sexp and macaddr.sexp ocamlfind
    subpackages and instead have ipaddr-sexp and macaddr-sexp
    to match the opam package names.

  • Add new Ipaddr_cstruct and Macaddr_cstruct libraries
    for conversion to/from cstructs (#36 @nojb @avsm)

v3.1.0 (2019-03-02)

  • Do not leak a Not_found exception when parsing [:
    in IPv6 and instead raise Parse_error as other errors
    do (found by fuzz testing in #84 by @dinosaure)

  • Install automatic toplevel printers for the Ipaddr
    types via [@@ocaml.toplevel_printer]. This enables
    utop to automatically install the printers (@avsm)

3.0.0 (2019-01-02)

This release features several backwards incompatible changes,
but ones that should increase the portability and robustness
of the library.

  • Remove the sexp serialisers from the main interface in favour
    of pp functions. Use the Ipaddr_sexp module if you still
    need a sexp serialiser.

    To use these with ppx-based derivers, simply replace the
    reference to the Ipaddr type definition with Ipaddr_sexp.
    That will import the sexp-conversion functions, and the actual
    type definitions are simply aliases to the corresponding type
    within Ipaddr. For example, you might do:

    type t = {
      ip: Ipaddr_sexp.t;
      mac: Macaddr_sexp.t;
    } [@@deriving sexp]
    

    The actual types of the records will be aliases to the main
    library types, and there will be two new functions available
    as converters. The signature after ppx has run will be:

    type t = {
      ip: Ipaddr.t;
      mac: Macaddr.t;
    }
    val sexp_of_t : t -> Sexplib0.t
    val t_of_sexp : Sexplib0.t -> t
    
  • Break out the Macaddr module into a separate opam package so
    that the Ipaddr module can be wrapped. Use the macaddr
    opam library now if you need just the MAC address functionality.

  • Replace all the of_string/bytes functions that formerly returned
    option types with the Rresult result types instead. This stops
    the cause of the exception from being swallowed, and the error
    message in the new functions can be displayed usefully.

  • In the Ipaddr.V6.to_string and to_buffer functions, remove the
    optional labelled argument v4 and always output v4-mapped strings
    as recommended by RFC5952. (#80 by @hannesm).

  • Remove pp_hum which was deprecated in 2.9.0.

  • Sexplib0 is now used which is more lightweight tha the full
    Sexplib library. Minimum OCaml version is now 4.04.0+ as a result
    of this dependency.

  • Improvements to the ocamldoc formatting strings for better
    layout and odoc compatibility.

2.9.0 (2018-12-11)

  • Add pp functions for prettyprinting and deprecate pp_hum variants.
    The two functions are currently the same, so porting is just a matter
    of replacing existing uses of pp_hum with pp (#71 @verbosemode)

  • Fix deprecation warnings on newer OCaml standard libraries (#74 @cfcs).

  • Fix base-unix depopt to be a real dependency (#68 @rgrinberg).

  • Fix missing sexplib dependency (#66 #67 @bmillwood).

  • Port to Dune from jbuilder and update opam metadata to 2.0 format (#76 @avsm).

  • Remove unused variable and bindings warnings in the implementation and
    signatures (#76 @avsm)

  • Fix toplevel handling of the ipaddr.top package by linking
    to compiler-libs instead of compiler-libs.toplevel (#76 @avsm based on
    fix in mirage/ocaml-uri#130 by @yallop)

  • Update Travis to test latest distros by using their aliases (#76 @avsm)

  • Upgrade opam metadata to the 2.0 format (#76 @avsm)

2.8.0 (2017-06-01)

  • Port to Jbuilder (#65 @vbmithr @avsm).
    There should be no observable changes, except that Ipaddr_unix is now
    in a separate subdirectory. This means that packages that implicitly
    depended on the module without including the ocamlfind ipaddr.unix
    package may now fail. Just adding the ocamlfind dependency will fix it,
    and is backwards compatible with older Ipaddr releases.

  • Minimum version of OCaml required is now 4.03.0 (formerly was 4.02.2),
    due to the use of recent ppx_sexp_conv with Jbuilder also having that
    as the minimum supported compiler version.

2.7.2 (2017-02-16)

  • Fix a missing findlib toploop package (#61 from Vincent Bernardoff)

2.7.1 (2016-11-16)

  • Use topkg for build (#60 from Jochen Bartl)

2.7.0 (2016-02-14)

  • Remove sexplib.syntax, type_conv deps and camlp4 transitive dependency

  • Add ppx_sexp_conv dependency

  • Require OCaml 4.02.2+

  • Add Ipaddr.Prefix.subset, Ipaddr.V4.Prefix.subset and Ipaddr.V6.subset
    predicates to test containment of subnets (#52 from @seliopou)

2.6.1 (2015-02-20)

  • Fix findlib requires in oasis to restore pre-4.02.1 compatibility

2.6.0 (2015-02-19)

  • Change IPv6 link-local address prefix from fe80::/10 to fe80::/64. (#39)

  • Remove type bytes = string alias (potentially breaking)

  • Turn on -safe-string (#41)

  • {V4,V6}.to_bytes_raw now uses Bytes.t rather than string (potentially breaking)

  • Add multicast MAC conversions from RFC 1112 and RFC 2464

  • Add to_domain_name conversions to DNS label lists (in-addr.arpa and ip6.arpa)

  • Add V6.interface_routers, V6.site_routers, and V6.Prefix.solicited_node

  • Add V6.link_address_of_mac to convert a MAC into a link local IP address

2.5.0 (2014-05-27)

  • Add with sexp (de)serializers to all of the Ipaddr and Macaddr types. (#31)

2.4.0 (2014-02-11)

  • Add Ipaddr.V6.Prefix.of_netmask for conversion from an IPv6
    address/netmask to prefix (useful for some binary interfaces). See #27.

  • Add Ipaddr.V6.Prefix.netmask to generate a netmask address from a
    prefix (useful for some binary interfaces). See #27.

  • Add Ipaddr.Prefix.network for generic prefix -> address conversion

  • Add Ipaddr.Prefix.netmask for generic prefix -> netmask conversion

2.3.0 (2014-02-05)

  • Add Ipaddr.V4.Prefix.of_netmask for conversion from an
    address/netmask to prefix

  • Add Ipaddr.V4.Prefix.netmask to generate a netmask address from a prefix

2.2.0 (2014-01-27)

  • Add an [Ipaddr_unix] module to convert to-and-from the standard library.

  • Add a toplevel pretty printer in the ipaddr.top package.

2.1.0 (2014-01-20)

  • Add of_string_raw to Ipaddr.V4.Prefix and Ipaddr.V6.Prefix

  • Add of_addr to Ipaddr.V4.Prefix and Ipaddr.V6.Prefix

  • Add type ('v4,'v6) v4v6 to Ipaddr to represent version disjuncts

  • Add Ipaddr.Prefix module for generic prefix manipulation

2.0.0 (2014-01-17)

  • Change Ipaddr.V4.make to accept int rather than int32 (breaking)

  • Add IPv6 support

  • Add generic IP address support

  • Add type scope for classifying address scopes

  • Add Ipaddr.V4.of_string_raw for parsing inside of larger strings

  • Add Ipaddr.V4.to_int16 and Ipaddr.V4.of_int16

  • Add unspecified, nodes, and routers constants to Ipaddr.V4

  • Add Ipaddr.V4.Prefix.network_address to put an address into a subnet

  • Add of_address_string_exn, of_address_string, to_address_string,
    to_address_buffer to Ipaddr.V4.Prefix to parse/print combined addr/prefix

  • Add multicast_org, multicast_admin, multicast_link subnet constants to
    Ipaddr.V4.Prefix

  • Add Ipaddr.V4.scope to classify IPv4 addresses

  • Add Ipaddr.V4.is_global and Ipaddr.V4.is_multicast predicates

  • Add optional sep:char argument to Macaddr.to_string

  • Remove internal use of Scanf.scanf

1.0.0 (2013-10-16)

  • Add Travis-CI testing scripts.

  • Include debug symbols and annot files by default.

0.2.3 (2013-09-20)

  • Add Ipaddr.V4.Prefix.bits function to produce bits of prefix from prefix.

0.2.2 (2013-08-07)

  • Add Macaddr.make_local function to create local unicast MAC
    addresses from an octet generation function.

  • Add Macaddr.get_oui accessor to extract the Organizationally Unique
    Identifier as an integer.

  • Add Macaddr.is_local predicate to test for a locally administered address.

  • Add Macaddr.is_unicast predicate to test for a unicast MAC address.

0.2.1 (2013-08-01)

  • Add Ipaddr.V4.any, Ipaddr.V4.broadcast, Ipaddr.V4.localhost
    special constant addresses.

  • Add Ipaddr.V4.Prefix.global (0.0.0.0/0) subnet constant.

  • Add Ipaddr.V4.Prefix.network function to produce subnet address from prefix.

0.2.0 (2013-08-01)

  • Add Macaddr module for handling MAC-48 (Ethernet) addresses.

  • Ipaddr.Parse_error now contains both the error condition and the
    failing input.

  • Add ocamldoc-compatible comments on all interfaces.

0.1.1 (2013-07-31)

  • Add loopback and link local addresses to the private blocks.

  • Fix build system so Makefile is generated by OASIS.

0.1.0 (2013-07-24)

  • Initial public release.

  • Includes IPv4 and IPv4 CIDR prefix support.