package dns-forward

  1. Overview
  2. Docs
include Mirage_flow_lwt.SHUTDOWNABLE
include Mirage_flow.S with type 'a io = 'a Lwt.t with type buffer = Cstruct.t
type 'a io = 'a Lwt.t

The type for potentially blocking I/O operations.

type error

The type for flow errors.

val pp_error : error Fmt.t

pp_error is the pretty-printer for errors.

type write_error = private [>
  1. | Mirage_flow.write_error
]

The type for write errors.

val pp_write_error : write_error Fmt.t

pp_write_error is the pretty-printer for write errors.

type buffer = Cstruct.t

The type for memory buffer.

type flow

The type for flows. A flow represents the state of a single reliable stream that is connected to an endpoint.

val read : flow -> (buffer Mirage_flow.or_eof, error) Pervasives.result io

read flow blocks until some data is available and returns a fresh buffer containing it.

The returned buffer will be of a size convenient to the flow implementation, but will always have at least 1 byte.

If the remote endpoint calls close then calls to read will keep returning data until all the in-flight data has been read. read flow will return `Eof when the remote endpoint has called close and when there is no more in-flight data.

val write : flow -> buffer -> (unit, write_error) Pervasives.result io

write flow buffer writes a buffer to the flow. There is no indication when the buffer has actually been read and, therefore, it must not be reused. The contents may be transmitted in separate packets, depending on the underlying transport. The result Ok () indicates success, Error `Closed indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.

val writev : flow -> buffer list -> (unit, write_error) Pervasives.result io

writev flow buffers writes a sequence of buffers to the flow. There is no indication when the buffers have actually been read and, therefore, they must not be reused. The result Ok () indicates success, Error `Closed indicates that the connection is now closed and therefore the data could not be written. Other errors are possible.

val close : flow -> unit io

close flow flushes all pending writes and signals the remote endpoint that there will be no future writes. Once the remote endpoint has read all pending data, it is expected that calls to read on the remote return `Eof.

Note it is still possible for the remote endpoint to write to the flow and for the local endpoint to call read. This state where the local endpoint has called close but the remote endpoint has not called close is similar to that of a half-closed TCP connection or a Unix socket after shutdown(SHUTDOWN_WRITE).

close flow waits until the remote endpoint has also called close before returning. At this point no data can flow in either direction and resources associated with the flow can be freed.

val shutdown_write : flow -> unit io

Close the write direction of the flow, flushing any buffered data and causing future calls to read by the peer to return `Eof.

val shutdown_read : flow -> unit io

Close the read direction of the flow, such that future calls to write by the peer will return `Eof

type address = Ipaddr.t * int

Identifies an endpoint for connect

val connect : ?read_buffer_size:int -> address -> flow Error.t

connect address creates a connection to address and returns he connected flow.

OCaml

Innovation. Community. Security.