package mirage-nat

  1. Overview
  2. Docs
Mirage-nat is a library for network address translation to be used with MirageOS

Install

Dune Dependency

Authors

Maintainers

Sources

mirage-nat-3.0.1.tbz
sha256=c117b248e32e94692b3c3eb45f1a6032b5281f363d850ed3673610c89dde8a29
sha512=1481775aa6a4e6812347be29832f99c3811909aff343d0fe25f92f65e00bda5d663cf9a96009959e63521c0123404874b66b54b8d3d5db69eca8b5682b8fc944

Description

Mirage-nat is a library for network address translation. It is intended for use in MirageOS and makes extensive use of tcpip, the network stack used by default in MirageOS unikernels.

Published: 10 Nov 2022

README

What is this?

mirage-nat is a library for network address translation. It is intended for use in MirageOS and makes extensive use of tcpip, the network stack used by default in MirageOS unikernels.

Organization

mirage-nat contains module type definitions for a data store. Given a data store fulfilling that module type, mirage-nat also can generate modules for useful network address translation operations (e.g. adding entries based on incoming packets and translating packets if matching entries are present).

mirage-nat also contains an implementation of such a data store based on the lru library. Currently Mirage_nat_lru is the only implementation; historical implementations using irmin as a backing store have been deprecated, but could be revived given sufficient interest.

Features and Limitations

mirage-nat allows users to add both source NAT (NAT) and destination NAT (Redirect) rules.

mirage-nat currently supports translations between many addresses on a private IPv4 network and a single public IPv4 address. It is not capable of translating between IPv4 and IPv6, nor is it capable of translating IPv6 packets between networks.

mirage-nat knows how to translate TCP and UDP packets. It can also translate some ICMP types:

  • timestamp requests and replies

  • information requests and replies

  • echo requests and replies (in other words, ping should work)

mirage-nat makes no attempt to track connection state and currently does not expire rules based on time's passage. Mirage_nat_lru expires the least recently used rules in response to memory pressure. In practice, this means rules will stick around as long as there's space for them, with no consideration for whether communication between hosts is still occurring. Notably, remote hosts which have been contacted by a host on the private network may be able to send traffic back through the NAT long after the host thinks the connection has been terminated.

Getting Started

The included example/ directory contains an example MirageOS unikernel which uses Mirage_nat_lru to provide source NATting between a private network and a public one. Try mirage configure --help in that directory for information on configuration parameters, and read unikernel.ml for more on how it works.

Network Setup

To get started, you'll need a "public" network (one from which the Internet is accessible) and a "private" network (one which doesn't have outside access; this will be provided by the unikernel once it's online). Configure the unikernel with the correct public network information, and an IP address on the private network. For example, to set up a unikernel with a public network on 192.168.3.1/24, and a private 10.0.0.0/24 network, if configured for Xen:

mirage configure -t xen --public-ipv4=192.168.3.1/24 --public-ipv4-gateway=192.168.3.254 --private-ipv4=10.0.0.1/24

Then follow the usual MirageOS workflow:

make depend
make

and start the unikernel as appropriate for the hypervisor:

sudo xl create simple_nat.xl -c

To see more console output, try increasing the log level with the -l argument to mirage configure.

Users

qubes-mirage-firewall, the unikernel firewall for QubesOS, uses mirage-nat to provide network address translation for guest domains.

Dependencies (7)

  1. ethernet >= "3.0.0"
  2. tcpip >= "7.0.0" & < "8.0.0"
  3. dune >= "1.0"
  4. lru >= "0.3.0"
  5. cstruct >= "6.0.0"
  6. ipaddr
  7. ocaml >= "4.08.0"

Dev Dependencies (4)

  1. logs with-test
  2. fmt with-test & >= "0.8.7"
  3. mirage-clock-unix with-test
  4. alcotest with-test

Used by

None

Conflicts (1)

  1. result < "1.5"
OCaml

Innovation. Community. Security.