package ppx_type_directed_value

  1. Overview
  2. Docs
Get [@@deriving]-style generation of type-directed values without writing a ppx

Install

Dune Dependency

Authors

Maintainers

Sources

ppx_type_directed_value-v0.15.0.tar.gz
sha256=2d72561276b7b3cc39bd60ca84b202881f0afbc7b96e93705972b2cc7ad83fbc

README.mdx.html

README.mdx

ppx_type_directed_value
=======================

Introduction
================

`Ppx_type_directed_value` is a ppx that does `[@@deriving]`-style
generation of type-directed values based on user-provided modules. The
user-provided modules tell `ppx_type_directed_value` how to compose
type-directed values (for example, combine type-directed values of the
fields of a record to form a type-directed value for the record
itself).

This allows a wide variety of PPXs such as `ppx_sexp_conv`,
`ppx_compare`, `ppx_enumerate`, etc. to be implemented with
`ppx_type_directed_value`, but with some runtime cost.

This PPX currently supports deriving type-directed values for records, ordinary
& polymorphic variants and tuples. It also supports custom user-defined attributes
on record and variant fields.

Motivation
==============

Many deriving PPXs have a similar quasi-recursive nature where the resulting
value derived by the PPX for a type is the composition of relevant values
assumed to be defined for each constituent of the type, where these values
are either "base cases" or are derived from the same PPX.

Using `ppx_sexp_conv` as an example, `sexp_of_t` where `t` is a record
will call the corresponding `sexp_of_[type]` on each field of the
record, place it in a `Sexp.List` with the field name, and place all
the `Sexp.t` for each field in another `Sexp.List`. Here,
`sexp_of_[type]` is often produced by `[type]` itself having a
`[@@deriving sexp]` annotation, although it's also sometimes manually
defined.

`Ppx_type_directed_value` allows users to define new `deriving`
annotations following this pattern without having to write any ppx
code, thus avoiding the boilerplate of registering your deriver,
traversing the AST etc.

Quickstart
===============
The easiest way to get started with `ppx_type_directed_value` is to
use an applicative.  This might not give you all the features you
want, but it'll get you off the ground.

For example, suppose you want to turn the `Command.Param` applicative into a ppx.  Then make a
module (called, say, `Type_directed.Command`) with this contents:
<!-- $MDX file=examples/type_directed_command.ml,part=of_applicative -->
```ocaml
open Ppx_type_directed_value_runtime
include Converters.Of_applicative (Core.Command.Param)
```

Then, add to your jbuild:

```
(preprocess (pps (ppx_type_directed_value -module -Type_directed.Command)))
```

Then you'll be able to do things like this:
<!-- $MDX file=test/inline/applicative.ml,part=applicative_demo -->
```ocaml
module Host_and_port = struct
  type t = Host_and_port.t =
    { host : string
             [@command.custom
               let open Command.Param in
               flag "host" (required string) ~doc:"host"]
    ; port : int
             [@command.custom
               let open Command.Param in
               flag "port" (required int) ~doc:"port"]
    }
  [@@deriving command]
end

type t =
  { host_and_port : Host_and_port.t
  ; name : string option
           [@command.custom
             let open Command.Param in
             flag "name" (optional string) ~doc:"name"]
  }
[@@deriving command]
```

This approach does have limitations.  For example, in this case
there's some unnecessary repetition between the field names and the
flag names, variants won't be supported, and you won't be able to use
attributes besides the custom one (`command.custom` in this case).
But it may be enough for you.

If you want to learn how to lift any of those restrictions, either
read on or poke around the examples/ directory.

Raw Interface
=====================

**Warning:** This section defines the "raw interface" that will give
you the most control over how the ppx works.  However, it's fairly
involved.  For a first read, you might just skim this section and
instead read the "Converters" section below.  That section describes
some utility functors which make it so that you don't have to write
the raw interface by hand.

The PPX expects to take in a module of the following type to guide the
generation of arbitrary type-directed values.

<!-- $MDX file=ppx_runtime/type_directed.mli,part=interface -->
```ocaml
(** Signature that a user-provided module should implement to guide the
    code generation of type-directed values *)
module type S = sig
  (** Type-directed value of interest *)
  module T : Type_directed_value

  (** Given transformations between two isomorphic types 'a, 'b,
      turns a 'a type-directed value to a 'b type-directed value
  *)
  val apply_iso  : 'a T.t -> ('a -> 'b) -> ('b -> 'a) -> 'b T.t

  val of_tuple   : ('a, 'length) Tuple(T).t -> 'a T.t
  val of_record  : ('a, 'length) Record(T).t -> 'a T.t
  val of_variant : ('a, 'length) Variant(T).t -> 'a T.t
end
```

Type-directed value
------------------------

<!-- $MDX file=ppx_runtime/type_directed.mli,part=tdv_sig -->
```ocaml
module type Type_directed_value = sig
  type 'a t

  (** ['a attribute] allows supporting attributes such as

      {[
        type t =
          { foo : int [@my_module attr]
          ; ...
          } [@@deriving my_module]
      ]}

      where in the above example [attr] would have type [int My_module.attribute].

      If you don't want to use this feature, you can define [type 'a attribute =
      Nothing.t]. *)
  type 'a attribute
end
```

A "type-directed value" is a value associated to a given type which can be
derived from the type definition in some way. In this context, we expect that
the type-directed value for a record can be derived from the values for the fields
and similarly for variants and tuples.

For example, if we were to implement `ppx_sexp_conv`, the type of the type-directed value
would be

<!-- $MDX file=test/inline/readme_scratch.ml,part=sexp_implementation -->
```ocaml
module _ = struct
  type 'a t =
    { sexp_of_t : 'a -> Sexp.t
    ; t_of_sexp : Sexp.t -> 'a
    }

  (* Don't implement any attributes for now *)
  type 'a attribute = Nothing.t
end
```

and the type of the type-directed value of a type `t` would be `t T.t`.

of_{tuple, record, variant}
----------------------------------

At a high level, these functions are the underlying implementations for composing
type-directed values from the constituent types of a tuple/record/variant.
They each take in a data structure, which contains the type-directed
values and other information (such as field names/constructor names/attributes)
that represents a tuple/record/variant type, and should return a
type-directed value for the tuple/record/variant type. We discuss the specifics below.


We begin with the simplest case - the tuple type. In order to support
tuples with arbitrary elements, we define a GADT to package the type-directed value
of each tuple element.

<!-- $MDX file=test/inline/readme_scratch.ml,part=tuple -->
```ocaml
  module _ (T : Type_directed.Type_directed_value) : sig
    type ('a, 'length) seq =
      | [] : (unit, zero) seq
      | ( :: ) : 'a T.t * ('b, 'l) seq -> ('a * 'b, 'l succ) seq

    type ('a, 'length) t = ('a, 'length succ succ) seq
  end
```
This enforces that the length of the list is at least 2.

The first index of the GADT, `'a`, is a nested pair that represents the
type of each element of the tuple packaged. The second index of the GADT,
`'length` tracks the length of the tuple at the type level. This data
structure can be thought of as a normal list where each element is the
corresponding type-directed value of each element in the tuple and
also tracks the type of each element as well as the length.

For example, given the tuple type `type t = int * string`, the data structure
given to `of_tuple` is `[{module}_int; {module}_string]` with type
`((int, (string, unit)), zero succ succ) Tuple(T).t`.
Note that the type-directed value `of_tuple` is expected to
return has type `(int, (string, unit)) T.t`, which is not the same as
`t T.t`. This is how `apply_iso` is used and will be discussed below.

The following is an example implementation of `of_tuple` for a type-directed value
that is the `equals` function.

<!-- $MDX file=test/inline/readme_scratch.ml,part=equal_implementation -->
```ocaml
module T = struct
  type 'a t = 'a -> 'a -> bool
  type 'a attribute = Nothing.t
end
```

<!-- $MDX file=examples/type_directed_equal.ml,part=equals_of_tuple -->
```ocaml
let rec of_tuple : type a len. (a, len) Type_directed.Tuple(T).t -> a T.t =
  fun t ->
  match t with
  | ([ v1; v2 ]                : _ Type_directed.Tuple(T).t) ->
    fun (fst1, (snd1, ())) (fst2, (snd2, ())) -> v1 fst1 fst2 && v2 snd1 snd2
  | (v1 :: (_ :: _ :: _ as tl) : _ Type_directed.Tuple(T).t) ->
    fun (hd1, tl1) (hd2, tl2) -> v1 hd1 hd2 && (of_tuple tl) tl1 tl2
;;
```

It is worth noting that the data structure can be similarly pattern-matched
like normal lists with a twist. Since OCaml tuples must have at least two
elements, the data structure also guarantees that there are at least two
elements at the type level. Thus, the base case is a "list" with
two elements while the pattern of the inductive case requires the
tail `tl` to have at least two elements to help the typechecker
verify that `of_tuple` can be recursively called on it.

`of_record` and `of_variant` work similarly but with inputs `('a, 'length) Record(T).t`
and `('a, 'length) Variant(T).t` instead. Both record and variant data structures
make use of the `Key` module which contains the name (field name for records,
constructor names for variants), a type-directed value and the attribute if present.

<!-- $MDX file=ppx_runtime/type_directed.mli,part=key_sig -->
```ocaml
module Key : sig
  type ('a, 'attribute) t =
    { name      : string
    ; value     : 'a
    ; attribute : 'attribute option
    }
end
```

The record data structure is similarly a GADT that is similar to a list where
each element is a `('a, 'attribute) Key(T).t` as shown below.

<!-- $MDX file=test/inline/readme_scratch.ml,part=record -->
```ocaml
  module _ (T : Type_directed.Type_directed_value) : sig
    type ('a, 'length) seq =
      | [] : (unit, zero) seq
      | ( :: ) :
          ('a T.t, 'a T.attribute) Type_directed.Key.t * ('b, 'l) seq
          -> ('a * 'b, 'l succ) seq

    type ('a, 'length) t = ('a, 'length succ) seq
  end
```
This enforces that the length of the list is at least 1.

For example, we have

<!-- $MDX file=test/inline/readme_scratch.ml,part=record_t -->
```ocaml
type t1 =
  { f1 : int
  ; f2 : string
  }

(* Generated value passed in to [of_record] *)
let t_t1 : (int * (string * unit), zero succ) Type_directed.Record(T).t =
  [ { name = "f1"; value = t_int; attribute = None }
  ; { name = "f2"; value = t_string; attribute = None }
  ]
;;
```

Finally, the variant data structure is also a GADT where each element
represents its constructors (ordinary or inlined record) as shown below.
<!-- $MDX file=test/inline/readme_scratch.ml,part=variant -->
```ocaml
  module _ (T : Type_directed.Type_directed_value) : sig
    type 'a variant =
      | Unlabelled : ('a, 'length) Type_directed.Variant_constructor(T).t -> 'a variant
      | Labelled : ('a, 'length) Type_directed.Record(T).t -> 'a variant

    type ('a, 'length) t =
      | [] : (Nothing.t, zero) t
      | ( :: ) :
          ('a variant, 'a T.attribute) Type_directed.Key.t * ('b, 'l) t
          -> (('a, 'b) Either.t, 'l succ) t
  end
end
```
Note that the definition of `Variant_constructor` is the same as `Tuple`
but without the guarantee that the list has length >= 2. The index of the GADT now
is nested `Either.t` instead of pairs to represent arbitrary length sum types.

For example, we have
<!-- $MDX file=test/inline/readme_scratch.ml,part=variant_t -->
```ocaml
type t2 =
  | A
  | B of int * string
  | C of { f : int }

(* Generated value passed in to [of_variant] *)
let t_t2
  : ( (unit, (int * (string * unit), (int * unit, Nothing.t) Either.t) Either.t) Either.t
    , zero succ succ succ ) Type_directed.Variant(T).t
  =
  [ { name = "A"; value = Unlabelled []; attribute = None }
  ; { name = "B"; value = Unlabelled [ t_int; t_string ]; attribute = None }
  ; { name = "C"
    ; value = Labelled [ { name = "f"; value = t_int; attribute = None } ]
    ; attribute = None
    }
  ]
;;
```

The implementation of `of_record` and `of_variant` for a type-directed value
that is the `equals` function are similar to `of_tuple` but is expectedly
more verbose and omitted here. You can find it in `test/examples/equals.ml`.


apply_iso
-----------

As mentioned above, the type of the GADT index is not exactly the type
of what we wish to derive.  But it happens to be isomorphic, so the
PPX calls `apply_iso` to turn the generated type-directed value from
`of_{tuple,record,variant}` into the desired type.

The implementation of `apply_iso` is generally simple. If the type-directed
value is the `equals` function with type `'a -> 'a -> bool`, we have

<!-- $MDX file=test/inline/readme_scratch.ml,part=apply_iso -->
```ocaml
let apply_iso instance _f f' x y = instance (f' x) (f' y)
```

Invoking the PPX
======================

The PPX takes the name of the module satisfying the interface above
as a command-line argument. For example, if the fully-qualified
module name is `Type_directed.Equals`, you should add
```
(preprocess (pps (ppx_type_directed_value -module -Type_directed.Equals)))
```
to the jbuild, which will register the deriver `[@@deriving equals]`.
Multiple modules can be registered by passing multiple
arguments of the form `-module -{Module_name}`.

Note that the module name should currently be prefixed with "-" in order
to get jenga to parse it as a command line argument.


Naming Conventions
========================

This PPX assumes (and generates) standard naming conventions for generated type-directed values.
Namely,

```
type t = ... [@@deriving equals]

(* generates *)
let equals : t Equals.T.t = ...

type custom_type = ... [@@deriving equals]

(* generates *)
let equals_custom_type : custom_type Equals.T.t = ...

type 'a poly = ... [@@deriving equals]

(* generates *)
let equals_poly : 'a Equals.T.t -> 'a poly Equals.T.t = ...
```

and so on.

Attributes
==============

This PPX has support for user-defined attributes on record fields and
variant constructors. Given a module (say)
`Ppx_type_directed_value_examples.Validate`, the attribute `validate`
is registered as shown below.

<!-- $MDX file=test/inline/readme_scratch.ml,part=attribute-user -->
```ocaml
let f2_attrib : int Ppx_type_directed_value_examples.Validate.attribute = Name "new-name"

type attrib_record =
  { f1 : int
  ; f2 : int [@validate f2_attrib]
  }
[@@deriving validate]

let a_attrib : unit Ppx_type_directed_value_examples.Validate.attribute =
  Name "new-name-1"
;;

let b_attrib : (int * (string * unit)) Ppx_type_directed_value_examples.Validate.attribute
  =
  Name "new-name-2"
;;

type attrib_variant_simple =
  | A [@validate a_attrib]
  | B of
      { f1 : int
      ; f2 : string
      } [@validate b_attrib]
[@@deriving validate]
```
Note that the polymorphic attribute type is instantiated with the type of
the field/constructor, and is passed to the `attribute` field in `Key.t`.

This PPX also registers the attribute `{module}.custom` to replace the default
type-directed value the PPX uses for a field/constructor. For instance,

<!-- $MDX file=test/test.ml,part=attribute-custom -->
```ocaml
    let always_equal : int -> int -> bool = fun _ _ -> true

    type t = { f1 : int [@type_directed_equal.custom always_equal] }
    [@@deriving type_directed_equal]
```

the PPX will populate the `value` field of the `Key.t` record with
`always_equal` instead of the default type-directed value, `type_directed_equal_int`.


Converters
=============

There are instances when the decision of how to compose type-directed values are
local, that is, you consider one field/constructor at a time and specify how to
combine the field/constructor with the recursively constructed type-directed value
of the rest of the record/variant. We provide a set of converters (`ppx_runtime/converters_intf.ml`)
with that take in comparatively simpler interfaces and produces modules that satisfy
the interface that the PPX expects. We present them in increasing order of complexity.

Of_applicative
------------------

An applicative module with type `Applicative.S` has sufficient
information to build a `Type_directed.S` that supports records and
tuples, but not variants. This can be done by using the
`Of_applicative` functor on the applicative module.

Semantically, the type-directed value is constructed as follows.

<!-- $MDX file=test/inline/readme_scratch.ml,part=of_applicative -->
```ocaml
type t =
  { f1 : int
  ; f2 : string
  }
[@@deriving command]

let command : (int * (string * unit)) Ppx_type_directed_value_examples.Command.T.t =
  let open Command.Param in
  both command_int (both command_string (return ()))
;;
```

For example, a PPX deriver for `Core.Command.Params` can be instantiated by

<!-- $MDX file=examples/type_directed_command.ml,part=of_applicative -->
```ocaml
open Ppx_type_directed_value_runtime
include Converters.Of_applicative (Core.Command.Param)
```

Note that attempting to derive variants with a `Type_directed.S` constructed in this manner
will result in a *runtime* error.

Of_simple
------------

If support for both records and variants are desired, but field names/constructor names
are irrelevant, the `Of_simple` functor can be used to build a `Type_directed.S`.
The input interface that is expected is

<!-- $MDX file=ppx_runtime/converters_intf.ml,part=simple_sig -->
```ocaml
module type Simple = sig
  type 'a t

  val apply_iso : 'a t -> ('a -> 'b) -> ('b -> 'a) -> 'b t
  val both      : 'a t -> 'b t -> ('a * 'b) t
  val unit      : unit t
  val either    : 'a t -> 'b t -> ('a, 'b) Either.t t
  val nothing   : Nothing.t t
end
```

* `both` specifies how to add an additional type-directed value, used for
  processing an additional record field or variant constructor argument.
* `either` specifies how to case an additional type-directed value, used
  for processing an additional variant constructor.
* `unit` is the default/base case for product types - for the `equals` function it
  is `fun () () -> true`
* `nothing` is the default/base case for variant types - for the `all` function in
  `ppx_enumerate` it is `[]`
* `apply_iso` is the same as in `Type_directed.S`

An example using `Of_simple` can be found in `examples/type_directed_enumerate.ml`

Of_simple_with_key
-----------------------

If field names/constructor names are relevant, the `Of_simple_with_key` functor
can be used to build a `Type_directed.S`.
The input interface that is expected is

<!-- $MDX file=ppx_runtime/converters_intf.ml,part=simple_with_key_sig -->
```ocaml
module type Simple_with_key = sig
  type 'a t
  type 'a attribute

  val apply_iso  : 'a t -> ('a -> 'b) -> ('b -> 'a) -> 'b t
  val both       : 'a t -> 'b t -> ('a * 'b) t
  val unit       : unit t
  val nothing    : Nothing.t t
  val both_key   : ('a t, 'a attribute) Key.t -> 'b t -> ('a * 'b) t
  val either_key : ('a t, 'a attribute) Key.t -> 'b t -> ('a, 'b) Either.t t
end
```

`Simple_with_key` differs from `Simple_key` by requiring an additional
`both_key` function and requires an `either_key` instead of `either`.
Both `both_key` and `either_key` have similar semantics as `both`
and `either` from above, except they have access to field names and
attributes in addition to the type-directed value.

An example using `Of_simple_with_key` can be found in `examples/type_directed_validate.ml`



Runtime Considerations
==============================

The usage of this PPX does incur a runtime cost proportional to the size of the type
(e.g. number of fields/constructors/elements in a record/variant/tuple).
In particular, if the type-directed value is a function type,
there will be a runtime cost on *every* invocation of the function.

A micro-benchmark was performed on the `equals` function from `[@@deriving equal]`
and from `[@@deriving type_directed_equal]` implemented with this PPX, using
`Int.equal` and `String.equal` for field comparisons. (see `bench/bench.ml`)

| # of record fields | Time/Run [@@deriving equal] | Time/Run [@@deriving type_directed_equal] |
|--------------------+-----------------------------+-------------------------------------------|
|                  6 | 13.29ns                     | 46.91ns                                   |
|                 16 | 30.83ns                     | 141.29ns                                  |
|                 30 | 58.37ns                     | 264.35ns                                  |
|                 60 | 121.50ns                    | 500.42ns                                  |
OCaml

Innovation. Community. Security.