package batteries

  1. Overview
  2. Docs
Legend:
Library
Module
Module type
Parameter
Class
Class type

Facilities for printing exceptions.

  • author Xavier Leroy (Base module)
  • author David Teller
val pass : ('a -> 'b) -> 'a -> 'b

Printexc.pass fn x applies fn to x and returns the result. If the evaluation of fn x raises any exception, the name of the exception is printed on standard error output, and the exception is raised again. The typical use is to catch and report exceptions that escape a function application. This function is a renamed version of Printexc.print from stdlib.

val catch : ('a -> 'b) -> 'a -> 'b

Printexc.catch fn x is similar to Printexc.print, but aborts the program with exit code 2 after printing the uncaught exception. This function is deprecated: the runtime system is now able to print uncaught exceptions as precisely as Printexc.catch does. Moreover, calling Printexc.catch makes it harder to track the location of the exception using the debugger or the stack backtrace facility. So, do not use Printexc.catch in new code.

val to_string : exn -> string

Printexc.to_string e returns a string representation of the exception e.

val print_backtrace : _ BatInnerIO.output -> unit

print_backtrace oc Prints the an exception backtrace on the output channel oc. The backtrace lists the program locations where the most-recently raised exception was raised and where it was propagated through function calls.

  • since 1.4.0
val get_backtrace : unit -> string

Printexc.get_backtrace () returns a string containing the same exception backtrace that Printexc.print_backtrace would print.

val record_backtrace : bool -> unit

Printexc.record_backtrace b turns recording of exception backtraces on (if b = true) or off (if b = false). Initially, backtraces are not recorded, unless the b flag is given to the program through the OCAMLRUNPARAM variable.

val backtrace_status : unit -> bool

Printexc.backtrace_status() returns true if exception backtraces are currently recorded, false if not.

val register_printer : (exn -> string option) -> unit

Printexc.register_printer fn registers fn as an exception printer. The printer should return None or raise an exception if it does not know how to convert the passed exception, and Some s with s the resulting string if it can convert the passed exception. Exceptions raised by the printer are ignored.

When converting an exception into a string, the printers will be invoked in the reverse order of their registrations, until a printer returns a Some s value (if no such printer exists, the runtime will use a generic printer).

val print : _ BatInnerIO.output -> exn -> unit

Print an exception. The stdlib print function is now named !pass.

val raise_with_backtrace : exn -> Stdlib.Printexc.raw_backtrace -> 'a

Reraise the exception using the given raw_backtrace for the origin of the exception

  • since 2.7.0 and OCaml 4.05.0
Raw backtraces
type raw_backtrace = Stdlib.Printexc.raw_backtrace

The abstract type raw_backtrace stores a backtrace in a low-level format, instead of directly exposing them as string as the get_backtrace() function does.

This allows delaying the formatting of backtraces to when they are actually printed, which may be useful if you record more backtraces than you print.

Raw backtraces cannot be marshalled. If you need marshalling, you should use the array returned by the backtrace_slots function of the next section.

  • since 2.2.0 and OCaml 4.01.0
val get_raw_backtrace : unit -> raw_backtrace

Printexc.get_raw_backtrace () returns the same exception backtrace that Printexc.print_backtrace would print, but in a raw format.

  • since 2.2.0 and OCaml 4.01.0
val print_raw_backtrace : Stdlib.out_channel -> raw_backtrace -> unit

Print a raw backtrace in the same format Printexc.print_backtrace uses.

  • since 2.2.0 and OCaml 4.01.0
val raw_backtrace_to_string : raw_backtrace -> string

Return a string from a raw backtrace, in the same format Printexc.get_backtrace uses.

  • since 2.2.0 and OCaml 4.01.0
Current call stack
val get_callstack : int -> raw_backtrace

Printexc.get_callstack n returns a description of the top of the call stack on the current program point (for the current thread), with at most n entries. (Note: this function is not related to exceptions at all, despite being part of the Printexc module.)

  • since 2.2.0 and OCaml 4.01.0
Uncaught exceptions
val default_uncaught_exception_handler : exn -> raw_backtrace -> unit

Printexc.default_uncaught_exception_handler prints the exception and backtrace on standard error output.

  • since 4.11
val set_uncaught_exception_handler : (exn -> raw_backtrace -> unit) -> unit

Printexc.set_uncaught_exception_handler fn registers fn as the handler for uncaught exceptions. The default handler prints the exception and backtrace on standard error output.

Note that when fn is called all the functions registered with Pervasives.at_exit have already been called. Because of this you must make sure any output channel fn writes on is flushed.

If fn raises an exception, it is ignored.

  • since 2.3.0 and OCaml 4.02.0
Manipulation of backtrace information

Those function allow to traverse the slots of a raw backtrace, extract information from them in a programmer-friendly format.

type backtrace_slot = Stdlib.Printexc.backtrace_slot

The abstract type backtrace_slot represents a single slot of a backtrace.

  • since 2.3.0 and OCaml 4.02
val backtrace_slots : raw_backtrace -> backtrace_slot array option

Returns the slots of a raw backtrace, or None if none of them contain useful information.

In the return array, the slot at index 0 corresponds to the most recent function call, raise, or primitive get_backtrace call in the trace.

Some possible reasons for returning None are as follow:

  • none of the slots in the trace come from modules compiled with debug information (-g)
  • the program is a bytecode program that has not been linked with debug information enabled (ocamlc -g)
  • since 2.3.0 and OCaml 4.02.0
type location = Stdlib.Printexc.location = {
  1. filename : string;
  2. line_number : int;
  3. start_char : int;
  4. end_char : int;
}

The type of location information found in backtraces. start_char and end_char are positions relative to the beginning of the line.

  • since 2.3.0 and OCaml 4.02
module Slot : sig ... end
Raw backtrace slots
type raw_backtrace_slot = Stdlib.Printexc.raw_backtrace_slot

This type allows direct access to raw backtrace slots, without any conversion in an OCaml-usable data-structure. Being process-specific, they must absolutely not be marshalled, and are unsafe to use for this reason (marshalling them may not fail, but un-marshalling and using the result will result in undefined behavior).

Elements of this type can still be compared and hashed: when two elements are equal, then they represent the same source location (the converse is not necessarily true in presence of inlining, for example).

val raw_backtrace_length : raw_backtrace -> int

raw_backtrace_length bckt returns the number of slots in the backtrace bckt.

  • since 2.3.0 and OCaml 4.02
val get_raw_backtrace_slot : raw_backtrace -> int -> raw_backtrace_slot

get_raw_backtrace_slot bckt pos returns the slot in position pos in the backtrace bckt.

  • since 2.3.0 and OCaml 4.02
val convert_raw_backtrace_slot : raw_backtrace_slot -> backtrace_slot

Extracts the user-friendly backtrace_slot from a low-level raw_backtrace_slot.

  • since 2.3.0 and OCaml 4.02
val get_raw_backtrace_next_slot : raw_backtrace_slot -> raw_backtrace_slot option

get_raw_backtrace_next_slot slot returns the next slot inlined, if any.

  • since 2.11.0 and OCaml 4.04
Exception slots
val exn_slot_id : exn -> int

Printexc.exn_slot_id returns an integer which uniquely identifies the constructor used to create the exception value exn (in the current runtime).

  • since 2.3.0 and OCaml 4.02.0
val exn_slot_name : exn -> string

Printexc.exn_slot_name exn returns the internal name of the constructor used to create the exception value exn.

  • since 2.3.0 and OCaml 4.02.0
type t = exn = ..

The type of exception values.

val use_printers : exn -> string option

Printexc.use_printers e returns None if there are no registered printers and Some s with else as the resulting string otherwise.

  • since 2.11.0 and OCaml 4.09
val to_string_default : exn -> string

Printexc.to_string_default e returns a string representation of the exception e, ignoring all registered exception printers.

  • since 2.11.0 and OCaml 4.09
type raw_backtrace_entry = Stdlib.Printexc.raw_backtrace_entry

A raw_backtrace_entry is an element of a raw_backtrace.

Each raw_backtrace_entry is an opaque integer, whose value is not stable between different programs, or even between different runs of the same binary.

A raw_backtrace_entry can be converted to a usable form using backtrace_slots_of_raw_entry below. Note that, due to inlining, a single raw_backtrace_entry may convert to several backtrace_slots. Since the values of a raw_backtrace_entry are not stable, they cannot be marshalled. If they are to be converted, the conversion must be done by the process that generated them.

Again due to inlining, there may be multiple distinct raw_backtrace_entry values that convert to equal backtrace_slots. However, if two raw_backtrace_entrys are equal as integers, then they represent the same backtrace_slots.

  • since 3.3.0 and 4.12.0
val raw_backtrace_entries : raw_backtrace -> raw_backtrace_entry array
  • since 3.3.0 and 4.12.0
val backtrace_slots_of_raw_entry : raw_backtrace_entry -> backtrace_slot array option

Returns the slots of a single raw backtrace entry, or None if this entry lacks debug information.

Slots are returned in the same order as backtrace_slots: the slot at index 0 is the most recent call, raise, or primitive, and subsequent slots represent callers.

  • since 3.3.0 and 4.12
OCaml

Innovation. Community. Security.