package lwt_react

  1. Overview
  2. Docs
include module type of React.S

Signal combinators.

Consult their semantics.

Primitive and basics

type 'a t = 'a React.signal

The type for signals of type 'a.

val const : 'a -> 'a React.signal

const v is always v, [const v]t = v.

val create : ?eq:('a -> 'a -> bool) -> 'a -> 'a React.signal * (?step:React.step -> 'a -> unit)

create i is a primitive signal s set to i and a set function. The function set is such that:

  • set v sets the signal's value to v at the time it is called and triggers an update step.
  • set ~step v sets the signal's value to v at the time it is called and updates it dependencies when step is executed
  • set ~step v raises Invalid_argument if it was previously called with a step and this step has not executed yet or if the given step was already executed.

Warning. set must not be executed inside an update step.

val value : 'a React.signal -> 'a

value s is s's current value.

Warning. If executed in an update step may return a non up-to-date value or raise Failure if the signal is not yet initialized.

val retain : 'a React.signal -> (unit -> unit) -> [ `R of unit -> unit ]

retain s c keeps a reference to the closure c in s and returns the previously retained value. c will never be invoked.

Raises. Invalid_argument on constant signals.

val stop : ?strong:bool -> 'a React.signal -> unit

stop s, stops updating s. It conceptually becomes const with the signal's last value and cannot be restarted. Allows to disable effectful signals.

The strong argument should only be used on platforms where weak arrays have a strong semantics (i.e. JavaScript). See details.

Note. If executed in an update step the signal may still update in the step.

val equal : ?eq:('a -> 'a -> bool) -> 'a React.signal -> 'a React.signal -> bool

equal s s' is true iff s and s' are equal. If both signals are constant eq is used between their value (defauts to structural equality). If both signals are not constant, physical equality is used.

val trace : ?iff:bool t -> ('a -> unit) -> 'a React.signal -> 'a React.signal

trace iff tr s is s except tr is invoked with s's current value and on s changes when iff is true (defaults to S.const true). For all t where [s]t = v and (t = 0 or ([s]t-dt= v' and eq v v' = false)) and [iff]t = true, tr is invoked with v.

From events

val hold : ?eq:('a -> 'a -> bool) -> 'a -> 'a React.event -> 'a React.signal

hold i e has the value of e's last occurrence or i if there wasn't any.

  • [hold i e]t = i if [e]<=t = None
  • [hold i e]t = v if [e]<=t = Some v

Transforming and filtering

val app : ?eq:('b -> 'b -> bool) -> ('a -> 'b) React.signal -> 'a React.signal -> 'b React.signal

app sf s holds the value of sf applied to the value of s, [app sf s]t = [sf]t [s]t.

val map : ?eq:('b -> 'b -> bool) -> ('a -> 'b) -> 'a React.signal -> 'b React.signal

map f s is s transformed by f, [map f s]t = f [s]t.

val filter : ?eq:('a -> 'a -> bool) -> ('a -> bool) -> 'a -> 'a React.signal -> 'a React.signal

filter f i s is s's values that satisfy p. If a value does not satisfy p it holds the last value that was satisfied or i if there is none.

  • [filter p s]t = [s]t if p [s]t = true.
  • [filter p s]t = [s]t' if p [s]t = false and t' is the greatest t' < t with p [s]t' = true.
  • [filter p e]t = i otherwise.
val fmap : ?eq:('b -> 'b -> bool) -> ('a -> 'b option) -> 'b -> 'a React.signal -> 'b React.signal

fmap fm i s is s filtered and mapped by fm.

  • [fmap fm i s]t = v if fm [s]t = Some v.
  • [fmap fm i s]t = [fmap fm i s]t' if fm [s]t = None and t' is the greatest t' < t with fm [s]t' <> None.
  • [fmap fm i s]t = i otherwise.
val diff : ('a -> 'a -> 'b) -> 'a React.signal -> 'b React.event

diff f s is an event with occurrences whenever s changes from v' to v and eq v v' is false (eq is the signal's equality function). The value of the occurrence is f v v'.

  • [diff f s]t = Some d if [s]t = v and [s]t-dt = v' and eq v v' = false and f v v' = d.
  • [diff f s]t = None otherwise.
val changes : 'a React.signal -> 'a React.event

changes s is diff (fun v _ -> v) s.

val sample : ('b -> 'a -> 'c) -> 'b React.event -> 'a React.signal -> 'c React.event

sample f e s samples s at e's occurrences.

  • [sample f e s]t = Some (f ev sv) if [e]t = Some ev and [s]t = sv.
  • [sample e s]t = None otherwise.
val on : ?eq:('a -> 'a -> bool) -> bool React.signal -> 'a -> 'a React.signal -> 'a React.signal

on c i s is the signal s whenever c is true. When c is false it holds the last value s had when c was the last time true or i if it never was.

  • [on c i s]t = [s]t if [c]t = true
  • [on c i s]t = [s]t' if [c]t = false where t' is the greatest t' < t with [c]t' = true.
  • [on c i s]t = i otherwise.
val when_ : ?eq:('a -> 'a -> bool) -> bool React.signal -> 'a -> 'a React.signal -> 'a React.signal
  • deprecated

    Use on.

val dismiss : ?eq:('a -> 'a -> bool) -> 'b React.event -> 'a -> 'a React.signal -> 'a React.signal

dismiss c i s is the signal s except changes when c occurs are ignored. If c occurs initially i is used.

  • [dismiss c i s]t = [s]t' where t' is the greatest t' <= t with [c]t' = None and [s]t'-dt <> [s]t'
  • [dismiss_ c i s]0 = v where v = i if [c]0 = Some _ and v = [s]0 otherwise.

Accumulating

val accum : ?eq:('a -> 'a -> bool) -> ('a -> 'a) React.event -> 'a -> 'a React.signal

accum e i is S.hold i (E.accum e i).

val fold : ?eq:('a -> 'a -> bool) -> ('a -> 'b -> 'a) -> 'a -> 'b React.event -> 'a React.signal

fold f i e is S.hold i (E.fold f i e).

Combining

val merge : ?eq:('a -> 'a -> bool) -> ('a -> 'b -> 'a) -> 'a -> 'b React.signal list -> 'a React.signal

merge f a sl merges the value of every signal in sl using f and the accumulator a.

[merge f a sl]t = List.fold_left f a (List.map []t sl).

val switch : ?eq:('a -> 'a -> bool) -> 'a React.signal React.signal -> 'a React.signal

switch ss is the inner signal of ss.

  • [switch ss]t = [[ss]t]t.
val fix : ?eq:('a -> 'a -> bool) -> 'a -> ('a React.signal -> 'a React.signal * 'b) -> 'b

fix i sf allow to refer to the value a signal had an infinitesimal amount of time before.

In fix sf, sf is called with a signal s that represents the signal returned by sf delayed by an infinitesimal amount time. If s', r = sf s then r is returned by fix and s is such that :

  • [s]t = i for t = 0.
  • [s]t = [s']t-dt otherwise.

eq is the equality used by s.

Raises. Invalid_argument if s' is directly a delayed signal (i.e. a signal given to a fixing function).

Note. Regarding values depending on the result r of s', r = sf s the following two cases need to be distinguished :

  • After sf s is applied, s' does not depend on a value that is in a step and s has no dependents in a step (e.g in the simple case where fix is applied outside a step).

    In that case if the initial value of s' differs from i, s and its dependents need to be updated and a special update step will be triggered for this. Values depending on the result r will be created only after this special update step has finished (e.g. they won't see the i of s if r = s).

  • Otherwise, values depending on r will be created in the same step as s and s' (e.g. they will see the i of s if r = s).

Lifting

Lifting combinators. For a given n the semantics is :

[ln f a1 ... an]t = f [a1]t ... [an]t

val l1 : ?eq:('b -> 'b -> bool) -> ('a -> 'b) -> 'a React.signal -> 'b React.signal
val l2 : ?eq:('c -> 'c -> bool) -> ('a -> 'b -> 'c) -> 'a React.signal -> 'b React.signal -> 'c React.signal
val l3 : ?eq:('d -> 'd -> bool) -> ('a -> 'b -> 'c -> 'd) -> 'a React.signal -> 'b React.signal -> 'c React.signal -> 'd React.signal
val l4 : ?eq:('e -> 'e -> bool) -> ('a -> 'b -> 'c -> 'd -> 'e) -> 'a React.signal -> 'b React.signal -> 'c React.signal -> 'd React.signal -> 'e React.signal
val l5 : ?eq:('f -> 'f -> bool) -> ('a -> 'b -> 'c -> 'd -> 'e -> 'f) -> 'a React.signal -> 'b React.signal -> 'c React.signal -> 'd React.signal -> 'e React.signal -> 'f React.signal
val l6 : ?eq:('g -> 'g -> bool) -> ('a -> 'b -> 'c -> 'd -> 'e -> 'f -> 'g) -> 'a React.signal -> 'b React.signal -> 'c React.signal -> 'd React.signal -> 'e React.signal -> 'f React.signal -> 'g React.signal

The following modules lift some of Stdlib functions and operators.

module Bool : sig ... end
module Int : sig ... end
module Float : sig ... end
module Pair : sig ... end
module Option : sig ... end
module Compare : sig ... end

Combinator specialization

Given an equality function equal and a type t, the functor Make automatically applies the eq parameter of the combinators. The outcome is combinators whose results are signals with values in t.

Basic types are already specialized in the module Special, open this module to use them.

module type EqType = sig ... end

Input signature of Make

module type S = sig ... end

Output signature of Make

module Make (Eq : EqType) : S with type 'a v = 'a Eq.t

Functor specializing the combinators for the given signal value type

module Special : sig ... end

Specialization for booleans, integers and floats.

Monadic interface

val return : 'a -> 'a signal

Same as const.

val bind : ?eq:('b -> 'b -> bool) -> 'a signal -> ('a -> 'b signal) -> 'b signal

bind ?eq s f is initially f x where x is the current value of s. Each time s changes to a new value y, bind signal f is set to f y, until the next change of signal.

val bind_s : ?eq:('b -> 'b -> bool) -> 'a signal -> ('a -> 'b signal Lwt.t) -> 'b signal Lwt.t

Same as bind except that f returns a promise. Calls to f are serialized.

Lwt-specific utilities

val with_finaliser : (unit -> unit) -> 'a signal -> 'a signal

with_finaliser f s returns a signal s' which behaves as s, except that f is called when s' is garbage collected.

val limit : ?eq:('a -> 'a -> bool) -> (unit -> unit Lwt.t) -> 'a signal -> 'a signal

limit f s limits the rate of s update with f.

For example, to limit it to 1 per second, you can use: limit (fun () -> Lwt_unix.sleep 1.0) s.

val keep : 'a signal -> unit

keep s keeps a reference to s so it will never be garbage collected.

Threaded versions of React transformation functions

The following functions behave as their React counterpart, except that they take functions that may yield.

The _s suffix means that calls are serialized.

val app_s : ?eq:('b -> 'b -> bool) -> ('a -> 'b Lwt.t) signal -> 'a signal -> 'b signal Lwt.t
val map_s : ?eq:('b -> 'b -> bool) -> ('a -> 'b Lwt.t) -> 'a signal -> 'b signal Lwt.t
val filter_s : ?eq:('a -> 'a -> bool) -> ('a -> bool Lwt.t) -> 'a -> 'a signal -> 'a signal Lwt.t
val fmap_s : ?eq:('b -> 'b -> bool) -> ('a -> 'b option Lwt.t) -> 'b -> 'a signal -> 'b signal Lwt.t
val diff_s : ('a -> 'a -> 'b Lwt.t) -> 'a signal -> 'b event
val sample_s : ('b -> 'a -> 'c Lwt.t) -> 'b event -> 'a signal -> 'c event
val accum_s : ?eq:('a -> 'a -> bool) -> ('a -> 'a Lwt.t) event -> 'a -> 'a signal
val fold_s : ?eq:('a -> 'a -> bool) -> ('a -> 'b -> 'a Lwt.t) -> 'a -> 'b event -> 'a signal
val merge_s : ?eq:('a -> 'a -> bool) -> ('a -> 'b -> 'a Lwt.t) -> 'a -> 'b signal list -> 'a signal Lwt.t
val l1_s : ?eq:('b -> 'b -> bool) -> ('a -> 'b Lwt.t) -> 'a signal -> 'b signal Lwt.t
val l2_s : ?eq:('c -> 'c -> bool) -> ('a -> 'b -> 'c Lwt.t) -> 'a signal -> 'b signal -> 'c signal Lwt.t
val l3_s : ?eq:('d -> 'd -> bool) -> ('a -> 'b -> 'c -> 'd Lwt.t) -> 'a signal -> 'b signal -> 'c signal -> 'd signal Lwt.t
val l4_s : ?eq:('e -> 'e -> bool) -> ('a -> 'b -> 'c -> 'd -> 'e Lwt.t) -> 'a signal -> 'b signal -> 'c signal -> 'd signal -> 'e signal Lwt.t
val l5_s : ?eq:('f -> 'f -> bool) -> ('a -> 'b -> 'c -> 'd -> 'e -> 'f Lwt.t) -> 'a signal -> 'b signal -> 'c signal -> 'd signal -> 'e signal -> 'f signal Lwt.t
val l6_s : ?eq:('g -> 'g -> bool) -> ('a -> 'b -> 'c -> 'd -> 'e -> 'f -> 'g Lwt.t) -> 'a signal -> 'b signal -> 'c signal -> 'd signal -> 'e signal -> 'f signal -> 'g signal Lwt.t
val run_s : ?eq:('a -> 'a -> bool) -> 'a Lwt.t signal -> 'a signal Lwt.t
OCaml

Innovation. Community. Security.